The pH::lyser is S::CAN’s pH sensor and is used for measuring the pH in drinking water, wastewater or surface water.
This sensor was designed according to the unique principle of using a non-porous and non-running combined reference electrode. This ensures a pH measurement that is stable over a long period of time with minimal need for maintenance. These electrodes do need to be replaced after a while. The frequency with which this should be done depends on the application and the intensity of use.
This sensor also contains a temperature sensor, so that the pH value is directly compensated for temperature influences. The temperature measured can be displayed separately.
The cleaning of this sensor is done by means of compressed air. It can be set up in-situ or in a flow cell. The sensor can be easily connected to a terminal according to the “plug & measure” principle. This is because it has already been calibrated after production. The calibration data are stored in the internal memory of the probe and are thus automatically recognised.
- Measuring principle: combined glass and reference electrode.
- Measures the pH.
- Automatic cleaning via compressed air.
- Automatic compensation for temperature.
- Installation: submerged in-situ or in flow cell.
